TRENDnet TC-NT3 tester for RJ11-RJ12-RJ45-USB

VDV and USB cable tester

• Complete Cable Tester for Network Professionals
• Tester of voice, data and video cables and USB cables
• Accurately checks pinouts for cable lengths up to 300 meters (1,000 feet)
• Detects cut, shorted and interconnected pins
• Quick Test mode offers pass or fail results for large batches of tests
• Blinking Hub/Switch mode detects the connected hub or switch port

• SPECIFICATIONS

• Pin configuration test
• RJ45 EIA, TIA-568A/568B and crossover cables
• RJ9, RJ11, RJ12, RJ14, RJ25, RJ45 and RJ61
• USOC 2, 4, 6 and 8
• Video-BNC coaxial and CATV-F
• USB3.0, USB2.0
• Transmitter unit interface
• 1 RJ port
• 1 USB 3.0/2.0 Type-A port
• 1 USB 3.0/2.0 Type-B port
• test button
• mode button
• The turn on and turn off button
• LED indicators
• battery compartment
• Receiver unit docking port
• Receiver unit interface
• 1 RJ port
• 1 USB 3.0/2.0 Type-A port
• Compatible cables*
• Cat. 8, 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e
• Coaxial Video-BNC and CATV-F cable (with included RJ45 to F adapters)
• RJ9, RJ11, RJ12, RJ14, RJ25 and RJ61 cables
• USOC 2, 4, 6 and 8
• USB 3.0 A to B
• USB 2.0 A to B
• tone frequency
• 600 – 1,000Hz
• Special features
• Checks the grounding of the protected cables (shielded)
• Detects cut, shorted and interconnected pins
• Continuous scan mode is designed to allow testing with cable ends in various locations
• Manual scanning is well suited to loopback cable testing
• Designed to quickly test large numbers of cables, Quick Test mode detects a given cable type and immediately reports a pass or fail result for that cable type
• Blinking hub/switch mode detects connected hub or switch port
• Compatible with TRENDnets TC-TP1, network sensor, to follow cables using two selectable tones
• Test cable lengths up to 300 meters (1,000 feet)
• Power supply
• Transmitter: 9V DC battery (not included)
• Remote unit: No power supply needed
• Operating temperature
• 0 - 50°C (32 - 122°F)
• Admitted humidity
• max. 95% non-condensing
• Certifications
• EC
• Dimensions
• Transmitter: 117 x 67 x 27 mm (4.6 x 2.6 x 1.1 inches)
• Remote unit: 57 x 30 x 27 mm (2.2 x 1.2 x 1.1 inches)
• Weight
• Transmitter: 144 g (5.1 oz)
• Remote unit: 26 g (0.9 oz)
• PACKAGE CONTENTS
• CT-NT3
• Quick installation guide
• 2 RJ45 to F adapters
• Network patch cable (15 cm/6 inches)
• Transport bag