SFP-4200 SFP Infinity (Mini-GBIC) transceiver module, GigE LC, multi-mode
- SFP (Mini-GBIC) fiber optic transceiver module for Gigabit Ethernet (IEEE 802.3z)
- Dual LC connector for multi-mode fiber (MMF), up to 550 m reach
- 850 nm wavelength, data transfer rate up to 1250 Mbit/s, full duplex
- Hot-swap capable with a simple 3.3V power source
- Low EMI metal housing, RoHS compliant, CE and FCC certified
SFP-4200 SFP Infinity (Mini-GBIC) transceiver module, GigE LC, multi-mode
The LEVEL ONE SFP-4200 is an SFP (Mini-GBIC) fiber optic transceiver module designed for Gigabit Ethernet links over multi-mode fiber. It uses a dual LC fiber connector and operates at an 850 nm wavelength, supporting a maximum data transfer rate of 1250 Mbit/s in full duplex. With a maximum transfer distance of 550 m over compatible multi-mode fiber (MMF), it is a practical building block for short-to-medium reach optical connections in network equipment with an SFP interface.
The module is hot-swappable, so it can be inserted or replaced without permanently powering down the host device, and it runs from a simple 3.3V power source. Its metal housing is designed for low EMI, and the module is RoHS compliant and lead-free, with CE and FCC certification. It complies with the IEEE 802.3z Gigabit Ethernet standard.
Physically compact at 14 mm wide, 57 mm deep and 12 mm high, and weighing around 20 g, the SFP-4200 fits standard SFP slots. It is supplied as 1 piece per package.
Características principales
- SFP (Mini-GBIC) fiber optic transceiver module
- Gigabit Ethernet IEEE 802.3z compliant
- Dual LC fiber connector, multi-mode fiber (MMF) compatible
- 850 nm wavelength, up to 1250 Mbit/s, full duplex
- Maximum transfer distance of 550 m
- Hot-swap support with a simple 3.3V power source
- Low EMI metal housing, RoHS compliant, CE and FCC certified
Specifications
| Transceiver type | SFP: Fiber optic |
| Maximum data transfer rate | 1250 Mbit/s |
| Interface type | SFP |
| Multi-mode fiber (MMF) compatible | Yes |
| Fiber optic connector | LC |
| Maximum transfer distance | 550 m |
| Wavelength | 850 nm |
| Tx power (min) | -10 dBmW |
| Tx power (max) | 4 dBmW |
| Network standards | IEEE 802.3z |
| Duplex system | Full |
| Hot-swap | Yes |
| Compliance certificates | RoHS |
| Certification | CE, FCC |
| Operating temperature range | -40 - 70 °C (summary also states -20 °C to 85 °C) |
| Storage temperature range | 5 - 70 °C |
| Operating relative humidity range | 5 - 85% |
| Storage relative humidity range | 5 - 95% |
| Width | 14 mm |
| Depth | 57 mm |
| Height | 12 mm |
| Weight | 20 g |
| Quantity per package | 1 piece(s) |
| Package width | 65 mm |
| Package depth | 106 mm |
| Package height | 20 mm |
| Package weight | 40 g |
| Harmonized System (HS) code | 85369010 |
Preguntas frecuentes
What type of fiber does the SFP-4200 work with?
It is compatible with multi-mode fiber (MMF) and uses a dual LC fiber connector.
What is the maximum distance and speed?
The module supports a maximum transfer distance of 550 m and a maximum data transfer rate of 1250 Mbit/s in full duplex at an 850 nm wavelength.
Can I replace it without powering off the device?
Yes, the module is hot-swappable and runs from a simple 3.3V power source.
Which standards and certifications does it carry?
It complies with IEEE 802.3z Gigabit Ethernet, is RoHS compliant and lead-free, and carries CE and FCC certification.
Es para ti si...
- You need a Gigabit Ethernet SFP module for multi-mode fiber with LC connectors
- You want a hot-swappable transceiver with a low-EMI metal housing
- You are building optical links up to 550 m at 850 nm
- You require a RoHS-compliant module with CE and FCC certification
| Brand | LEVEL ONE |
|---|---|
| Country | Netherlands |
| Address of origin | Krijgsman 1, 1186 DM Amstelveen |
| EU responsible person | Digital Data Communications (DDC) Group |
| Address | Krijgsman 1, 1186 DM Amstelveen |
| [email protected] | |
| Phone | +49 (0) 231 9075 - 0 |