Tekbox TBOH01 / DC LISN up to 10 A

5 μH Line Impedance Simulation Network (LISN) for DC-powered devices up to 10 A

The 5µH LISN (Line Impedance Stabilization Network), model TBOH01, is used to measure conducted emissions from devices with DC power supplies. The device was developed for EMC pre-compliance testing in the frequency range from 150 kHz to 110 MHz. The LISN is connected in series with the power supply line of the DUT (Device Under Test). Conducted disturbances present on the DUT’s power supply can be measured via the BNC connector in conjunction with a spectrum analyzer or measurement receiver. The input (voltage source connection) and output (DUT connection) of the LISN are decoupled via a 5 μH air coil.

Features

• Frequency range: 100 kHz–110 MHz
• DC resistance: 60 mΩ
• Maximum current: 10 A
• Maximum supply voltage: 200 V
• Integrated overvoltage protection