Atx Sharkoon Rev300 Case

Revolutionize your gaming rig with the REV300, an innovative ATX case built for the best performance. The well-crafted concept it incorporates will offer you a completely new experience when assembling your custom pc. A louvered front panel and seven pre-installed PWM fans optimize airflow and maximize the performance of your hardware. Thanks to the addressable LEDs on the fans and the tempered glass side panel, we will be able to appreciate in the best possible way everything that is assembled inside the REV300.

REVolution instead of tradition. With our REV series, we have completely turned the traditional box design on its head. The REV300 is no exception here, and as with previous models, the interior is perfectly visible through a tempered glass side panel located on the right side of the case. Ideal for those who want to position their powerful gaming system on the left side of the setup. What is REVOLUTIONARY is also the installation of all the components around a motherboard rotated 90 degrees. Motherboard cables and connections are routed to a special cable compartment located on the top of the case. The I / O panel not only provides four conventional USB connections, but also offers a port for devices that require a USB Type-C connection.

Generous space and elegant design. The REV300 stands out thanks to its majestic size and elegant appearance. Geometric designs in the corners of the grille-covered front panel provide a visual accent that draws our attention to the illumination of the addressable RGB LED fans. The impressive lighting on the REV300 is further enhanced by the minimalist case design. Seven fully addressable RGB LED fans take this large box into a colorful atmosphere, transforming it into an RGB enthusiasts dream.

Maximum air flow. Maximum power. Anyone with a demanding gaming rig knows that proper airflow is essential. The REV300 is equipped for this. Seven fans come pre-installed in the box, so youre ready to start benefiting from maximum cooling for your hardware. A grille runs the length of the entire front panel, clearing the way for as much air as possible, powered by three 140mm RGB LED fans. A further three 120mm RGB LED fans come installed on the rear. All of them, supplemented by an additional 120mm RGB LED fan under the top panel, create efficient airflow that will cool our systems even when we push them to their full potential. If we require water cooling, two radiators can be installed at the same time inside the REV300. A 360mm radiator can be installed on the rear panel, while there is even space for a giant 420mm radiator behind the front panel.

For systems that deserve to be admired. The REV300 provides an in-depth look inside the case and the installed hardware components. A tempered glass side panel on the right side of the box allows us to show the system in its entirety. The side panel is conveniently supported by hinges at the back, making it very easy to open and close. A magnetic closure ensures that everything is securely closed. Screws or other annoying elements are in this way completely hidden from view and on the contrary the hardware components are more easily accessible. Together with the illumination of a total of seven RGB LED fans, the presentation is perfect.

Make room for your monster build. No box in the REV series has ever been as big as the REV300. Consequently, the ATX case provides plenty of room for large and powerful hardware. Here we have space for everything that is necessary. Graphics cards with a length of up to 34.5 cm can be easily installed. A power supply with a length of 27 cm or a CPU cooler with a height of 17.7 cm will easily find space here. If we need a lot of data storage space, we can equip the REV300 with four 3.5 ”or five 2.5” storage drives. In addition, dust filters help us keep the inside of the box clean. A particularly large dust filter, which we can remove, is located on the bottom panel, preventing the entry of dust from the bottom of the box.

Compatibility
Base plate
Mini-ITX, Micro-ATX, ATX, E-ATX
Max. graphics cards length
34.5 / 33.3 cm *
Max. CPU cooler height
17.7 cm
Max. length of power supply
27.0 cm
Max. radiator height incl. fan (front)
7.4 cm / 5.7 cm **
Max. radiator height incl. fan (rear)
6.5 cm

• Using the optional Angled Graphics Card Kit
  • Using a 420mm radiator