The D-Link DEM-410T is an SFP+ copper transceiver module designed to bring 10 Gigabit Ethernet over standard twisted-pair cabling. It slots into an SFP+ port and presents an RJ-45 connection, making it a practical choice for linking switches, servers or other network equipment over short runs without moving to fibre. If you need 10GBASE-T connectivity in a compact, hot-swappable form factor, this module is built for the job.
Highlights
- 10 Gbit/s over copper: the module supports a maximum data transfer rate of 10000 Mbit/s, so you can add 10 Gigabit Ethernet to an SFP+ port using familiar RJ-45 cabling.
- Works with standard network standards: it complies with IEEE 802.3ab and IEEE 802.3an, covering both 1000BASE and 10GBASE Ethernet technologies.
- Short-run flexibility: the maximum transfer distance is 30 m, which suits connections within a rack, between adjacent racks or across a small equipment room.
- Single RJ-45 port: the copper interface gives you one Ethernet LAN port, so you can use structured cabling rather than specialist fibre leads.
- Low input voltage: it operates at 3.3 V, matching the power expected from an SFP+ slot.
- Reliability figure: the mean time between failures is 217186 hours, a useful indicator of expected service life for planning purposes.
- Regulatory compliance: the module carries CE, FCC and VCCI certification, and conforms to RoHS and LVD safety requirements.
Technical specifications
Performance
| SFP transceiver type | Copper |
| Maximum data transfer rate | 10000 Mbit/s |
| Interface type | SFP+ |
| SFP transceiver standard | T |
| Maximum transfer distance | 30 m |
| Ethernet LAN | Yes |
| Ethernet interface type | 10 Gigabit Ethernet |
| Networking standards | IEEE 802.3ab, IEEE 802.3an |
| Ethernet LAN (RJ-45) ports | 1 |
| Fiber ethernet cabling technology | 10GBASE, 1000BASE |
Features
| Product colour | Gold, Silver |
| Mean time between failures (MTBF) | 217186 h |
Power
Certificates
| Compliance certificates | RoHS |
| Safety | LVD |
| Certification | CE, FCC, VCCI |
Operational conditions
| Operating temperature (T-T) | 0 - 60 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 5 - 95% |
| Storage relative humidity (H-H) | 5 - 95% |
Weight & dimensions
| Width | 13.7 mm |
| Depth | 68 mm |
| Height | 8.5 mm |
| Weight | 20 g |
Packaging data
| Package width | 74 mm |
| Package depth | 131 mm |
| Package height | 49 mm |
| Package weight | 64 g |
Manufacturer technical data.
Frequently asked questions
What kind of cabling does this module use?
It is a copper SFP+ transceiver with a single RJ-45 Ethernet port. It is intended for twisted-pair network cabling and supports 10GBASE and 1000BASE Ethernet technologies.
How far can it carry a signal?
The maximum transfer distance is 30 m. That makes it suitable for short connections such as switch-to-switch links within a rack or between nearby cabinets.
What data rate can it handle?
The maximum data transfer rate is 10000 Mbit/s, and it is classed as 10 Gigabit Ethernet. It also complies with IEEE 802.3ab and IEEE 802.3an.
What are its operating conditions?
It works in temperatures from 0 to 60 °C and in relative humidity from 5 to 95%. Its input voltage is 3.3 V.