TRENDnet Switch TI-E50 5 Ports/ RJ-45 10/100

5-port Industrial Fast Ethernet DIN Rail Switch

• TI-E50 (Version v1.0R)
• 5 port fast ethernet
• 1 Gbps switching capacity
• IP30 rated metal reinforced switch
• Includes DIN rail mounting hardware and wall mounting brackets
• Wide operating temperature range, from -40 to 75°C (-40 to 167°F)
• Redundant dual power inputs with overload protection
• Power supply sold separately (model TI-M6024)
• Fanless design for quiet operation
• NDAA/TAA compliant (US and Canada only)

TRENDnet Industrial Fast Ethernet DIN-Rail Switches feature a rugged IP30-rated metal enclosure. These industrial Ethernet switches are designed to withstand high levels of vibration and shock; They operate in both low and high temperatures in industrial environments, from -40° to 75° C (-40° to 167° F). Redundant power inputs with surge protection on each ondustrial Ethernet switch minimize network downtime.

simple installation

No configuration required, just connect your network devices to the industrial Ethernet switch
secondary power supply
These industrial Ethernet switches feature dual power inputs to provide redundant power with surge protection.

rugged industrial design

It is equipped with a robust IP30-rated enclosure designed to withstand a high degree of vibration and shock, and operates in a wide temperature range, from -40 to 75°C (-40 to 167°F).
Industrial Ethernet switches offer a quick and easy installation process with an intuitive guided configuration

DIN Rail Mount / Coated

IP30 rated metal housing with DIN rail and wall mounting hardware included

secondary power supply

Dual redundant power inputs with overload protection (power supply sold separately, models: TI-M6024)

Wide operating temperature range

Its wide operating temperature range of -40° to 75° C (-40° to 167° F) allows installations in extremely hot or cold industrial environments

Shock and vibration resistant

Rated for shock (EN 60068-2-27), free fall (EN 60068-2-32) and vibration (EN 60068-2-6)
Compliance with electromagnetic standards
They comply with EMS industrial certifications (IEC 61000-4-2) for protection against electrostatic discharge: Contact: 6kV | Air: 8kV, (IEC 61000-4-4) Electrical Fast Transients: Power: 2kV | Signal: 2kV, (61000-4-5) Overvoltage: Power: 2kV Signal: 2kV

ground connection point

The grounding point of each Industrial Ethernet Switch is designed to protect the equipment from external electrical surges.

SPECS

• Standards
• IEEE802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE802.3x
• device interface
• 5-port Fast Ethernet
• Removable 4-pin terminal block
• LED indicators
• wall mount
• DIN Rail Mount
• ground connection point
• Data transfer rate
• Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
• Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
• Performance
• Data RAM buffer: 56KB (modify unit of measure)
• Switching mesh: 1Gbps
• MAC address table: 1K entries
• Forwarding rate: 0.744 Mpps (64-byte packet size)
• Special features
• Heavy-duty components rated for extreme temperatures
• Redundant power inputs
• Supports 8kV ESD protection
• low profile design
• DC power
• Input: 12 – 56V DC
• Recommended power supply: TI-M6024 (sold separately)
• Maximum consumption: 2.24W
• terminal block
• Redundant power inputs, 4-pin
• Wire range: 0.34mm^2 to 2.5mm^2
• Solid wire (AWG): 12-24/14-22
• Stranded Wire (AWG): 12-24/14-22
• Torque: 5 in-lbs / 0.5 Nm / 0.56 Nm
• Wire Strand Length: 7 – 8mm
• MTBF
• 510,304 hours
• Case
• IP30 metal casing
• DIN rail mounting
• wall mount
• ground connection point
• Operating temperature
• -40° – 75° C (-40° – 167° F)
• Supported Humidity
• max 95% non-condensing
• Dimensions
• 104 x 82 x 32mm (4 x 3.2 x 1.25 inches)
• Weight
• 635g (22.5oz)
• certifications
• EC
• FCC
• Shock (IEC 60068-2-27)
• Free fall (IEC 60068-2-32)
• Vibrations (IEC 60068-2-6)
• IEC 61000-4-2
• IEC 61000-4-4
• IEC 61000-4-5
• Warranty
• 3 years
• PACKAGE CONTENTS
• TI-E50
• quick installation guide
• removable terminal block
• DIN rail and wall mounting kit