YEALINK WF40 WLAN 150 Mbit/s

The Yealink WF40 is a wireless USB adapter built as a component for IP phones, letting you add WLAN connectivity through the host device's USB port. It uses a USB 2.0 host interface and supports a maximum data transfer rate of 150 Mbit/s, so compatible IP phones can connect over Wi-Fi instead of relying on a wired network link.

It works across the IEEE 802.11b, 802.11g and 802.11n standards (Wi-Fi 4) on the 2.4 GHz band. For network protection, it supports 64-bit WEP, 128-bit WEP, 152-bit WEP and WPA2-PSK security algorithms. The adapter comes in a black finish and measures just 18 mm wide, 26.9 mm deep and 8 mm high, keeping it discreet when plugged in.

Operating temperature is rated from 0 to 50 °C, and it can be stored between -40 and 85 °C.

Características principales

• Wireless connectivity via USB 2.0 host interface
• WLAN interface with a maximum transfer rate of 150 Mbit/s
• Wi-Fi 4 (802.11n) with support for 802.11b and 802.11g
• 2.4 GHz bandwidth
• Security support: 64-bit, 128-bit and 152-bit WEP plus WPA2-PSK
• Designed as a component for IP phones
• Compact black housing: 18 x 26.9 x 8 mm

Especificaciones

Preguntas frecuentes

What is the Yealink WF40?

It is a wireless USB adapter designed as a component for IP phones, providing WLAN connectivity through a USB 2.0 host interface.

How fast is the connection?

The adapter supports a maximum data transfer rate of 150 Mbit/s over Wi-Fi 4 (802.11n).

Which Wi-Fi standards and band does it use?

It supports IEEE 802.11b, 802.11g and 802.11n on the 2.4 GHz bandwidth.

What security does it support?

It supports 64-bit WEP, 128-bit WEP, 152-bit WEP and WPA2-PSK security algorithms.

Es para ti si...

• You want to add WLAN connectivity to a compatible IP phone via USB
• You need a compact 2.4 GHz Wi-Fi 4 adapter with up to 150 Mbit/s
• You require WEP or WPA2-PSK security support