Satel Be Wave System Controller with GSM Smart Hub Plus Module
SATEL BE WAVE SYSTEM CONTROLLER WITH GSM SMART HUB PLUS MODULE
The Satel BE WAVE system controller with GSM Smart Hub Plus module (model 51261) is a versatile wireless alarm control panel designed for residential and small commercial applications. It integrates a quad-band GSM communicator for remote management via SMS or voice calls, allowing users to arm/disarm the system and receive event notifications. The controller supports up to 32 wireless zones using BE WAVE or ABAX 2 detectors, plus 2 wired zones for additional sensors.
With two programmable OC-type outputs, the controller can control external sirens, lights, or other devices. The built-in Smart Hub Plus module enhances connectivity and enables firmware updates via USB. The system is easy to install and configure using the DLOADX or BE WAVE configurator software. It also features a tamper switch for protection against enclosure opening.
| Brand | Satel |
| Model | 51261 |
| Type | Wireless alarm system controller with GSM module |
| Wireless Zones | Up to 32 (BE WAVE or ABAX 2) |
| Wired Zones | 2 (EOL 2.2 kΩ) |
| Outputs | 2 OC type, 500 mA max each |
| GSM Communicator | Quad-band 850/900/1800/1900 MHz |
| Power Supply | 12 V DC ±15% |
| Current Consumption | Max 250 mA (without external devices) |
| Operating Temperature | -10°C to +55°C |
| Dimensions | 162 x 112 x 36 mm |
| Weight | Approx. 200 g |
| Compliance | CE, EN 50131 Grade 2 |
| Brand | Satel |
|---|---|
| Country | Poland |
| Address of origin | Budowlanych 66, 80-298 Gdansk |
| EU responsible person | SATEL sp. z o.o. |
| Address | Budowlanych 66, 80-298 Gdansk |
| [email protected] | |
| Phone | +48 58 320 94 00 |
This product connects to the internet or to other devices and generates data when you use it. The manufacturer publishes what data it collects, how it is used and how you can access it.
The link goes to the manufacturer’s official page.