DisplayPort (M) V1.1 to HDMI (M) Cable 1m Black

The LANBERG CA-DPHD-11CC-0010-BK is a 1-metre black cable that connects a DisplayPort source to an HDMI display. It uses a straight male DisplayPort connector on one end and a straight male HDMI connector on the other, so you can link a DisplayPort-equipped device to an HDMI screen or projector without an adapter.

Built around the NXP PTN3361 chipset, this cable supports video modes up to 1080p at a maximum refresh rate of 60 Hz and a data transfer rate of 4.95 Gbit/s. The DisplayPort side is version 1.1. The cable has a 6 mm diameter with 30 AWG wire and a copper housing, and each pack contains one cable.

Key features

• DisplayPort (M) V1.1 to HDMI (M) connection
• 1 m cable length in black
• Supports 1080p video at up to 60 Hz
• Data transfer rate up to 4.95 Gbit/s
• NXP PTN3361 chipset
• Straight male connectors on both ends
• 6 mm cable diameter, 30 AWG wire, copper housing

Specifications

Frequently asked questions

What resolution and refresh rate does this cable support?

It supports video modes up to 1080p with a maximum refresh rate of 60 Hz.

What connectors does it have?

It has a male DisplayPort connector (version 1.1) on one end and a male HDMI connector on the other, both with straight form factors.

How long is the cable and what colour is it?

The cable is 1 m long and black, with a 6 mm diameter.

What chipset is used?

The cable uses the NXP PTN3361 chipset and supports a data transfer rate of 4.95 Gbit/s.

It is for you if...

• You need to connect a DisplayPort output to an HDMI display over a 1 m distance.
• You want 1080p video at up to 60 Hz.
• You prefer a single black cable with straight male connectors on both ends.