Cable SFP+ 5m EX-SFP-10GE-DAC
- 5 m SFP+ direct attach copper cable for 10 Gbps Ethernet
- Passive twinax design with male SFP+ connectors on both ends
- Hot-swappable and plug-and-play for minimal network disruption
- Compatible with Juniper EX-SFP-10GE-DAC-5M and MSA standards
- Low power consumption under 0.5 W and RoHS certified
Cable SFP+ 5m EX-SFP-10GE-DAC
The StarTech.com EXSFP10GEDA5 is a 5-meter SFP+ direct attach copper cable designed for 10 Gigabit Ethernet applications. It provides a cost-effective alternative to fiber optic assemblies for short-distance connections between switches or point-to-point server links in racks. The cable is programmed and tested for compatibility with Juniper routers and switches, specifically the EX-SFP-10GE-DAC-5M model, and also complies with industry MSA (Multi-Source Agreement) standards.
Constructed with passive twinax copper and a PVC jacket, this black cable features male SFP+ connectors on both ends. It supports hot-swapping, allowing you to replace or upgrade connections without significant network downtime. With a data transfer rate of 10,000 Mbit/s and low power consumption of less than 0.5 W, it delivers reliable high-speed performance while minimizing energy use.
Operating temperature ranges from 0 to 70°C, and storage temperature from -40 to 80°C. The cable is RoHS certified and meets CE, FCC, and REACH conformity standards. It weighs 294 g and comes in packaging measuring 250 mm wide, 330 mm deep, and 25 mm high, with a package weight of 312 g.
Main features
- 5 m length for flexible rack and switch connections
- 10 Gbps data transfer rate via SFP+ connectors
- Passive twinax copper construction with PVC jacket
- Hot-swappable and plug-and-play support
- Juniper EX-SFP-10GE-DAC-5M compatibility and MSA compliance
- Low power consumption under 0.5 W
- RoHS, CE, FCC, and REACH certified
Especificaciones
| Cable length | 5 m |
| Data transfer rate | 10000 Mbit/s |
| Connector 1 | SFP+ |
| Connector 2 | SFP+ |
| Connector 1 gender | Male |
| Connector 2 gender | Male |
| Product color | Black |
| Jacket material | Polyvinyl chloride (PVC) |
| Plug and Play | Yes |
| Certification | CE, FCC, REACH |
| Compliance certificates | RoHS |
| Operating temperature range | 0 - 70 °C |
| Storage temperature range | -40 - 80 °C |
| Weight | 294 g |
| Package width | 250 mm |
| Package depth | 330 mm |
| Package height | 25 mm |
| Package weight | 312 g |
| Quantity per pack | 1 piece(s) |
| Harmonized System (HS) code | 84733080 |
| Master case width | 266 mm |
| Master case length | 350 mm |
| Master case height | 306 mm |
| Quantity per master case | 10 piece(s) |
| InfiniBand protocol | Yes |
Frequently asked questions
Is this cable compatible with Juniper equipment?
Yes, it is specifically designed and tested for compatibility with Juniper routers and switches, including the EX-SFP-10GE-DAC-5M model, and also complies with MSA standards.
What is the maximum data transfer rate?
The cable supports a data transfer rate of 10,000 Mbit/s (10 Gbps).
Can I use this cable in hot-swap applications?
Yes, it supports hot-swapping, allowing you to replace or add connections without powering down the network.
What are the operating temperature limits?
The cable operates between 0°C and 70°C and can be stored between -40°C and 80°C.
It is for you if...
- You need a reliable 5m SFP+ DAC cable for 10G Ethernet links
- You require Juniper compatibility or MSA compliance
- You want a low-power, hot-swappable copper alternative to fiber
- You value RoHS and CE certified networking components
-
Cable length5 m
| Brand | STARTECH |
|---|---|
| Country | Netherlands |
| Address of origin | Siriusdreef 17-27, 2132 WT Hoofddorp |
| EU responsible person | StarTech.com Europe LLP |
| Address | Boeing Avenue 8, Schiphol-Rijk, Netherlands, 1119PB |
| [email protected] | |
| Phone | 31203699300 |
12 other products in the same category
Viewed products