Two-channel vehicle surveillance system designed to cover the front and rear of the car simultaneously. Unlike systems that sacrifice quality by using multiple channels, this model maintains high native resolutions: 4K (3840 x 2160 px at 30 fps) on both front and rear units. This configuration ensures the identification of number plates and perimeter details at any angle.
The main hardware mounts 1/1.8-inch Sony STARVIS 2 IMX678 sensors. The optics feature F1.75 and F1.7 apertures, managed by the NightVIS 2.0 algorithm. The system uses loop recording with triple exposure HDR, which allows for balancing highlights and shadows, preventing headlights from other vehicles from "burning" the image in night recordings. In addition, it incorporates a CPL filter to eliminate reflections from the windscreen and four infrared lights on the interior camera for recording in total darkness inside the passenger compartment.
Data security is supported by D²save 2.0 technology. The device uses a redundant storage system: an on-board 128 GB eMMC memory combined with a MicroSD slot for up to 512 GB. If the external card fails during an impact or due to physical wear and tear, the video stream is automatically diverted to the internal memory, ensuring the integrity of the expert evidence.
Replaces lithium batteries with a super capacitor. This component allows operation in thermal ranges from -20°C to 70°C, eliminating the risk of heat ignition and ensuring that the last video file is properly closed after engine shutdown or a sudden power failure.
Connectivity includes 5 GHz Wi-Fi for fast smartphone transfers and Bluetooth for agile pairing. The mount integrates a multi-constellation GPS chip that records speed, coordinates and telemetry at every clip. The system is expandable with an external 4G module for remote monitoring.
On the assistance side, the ADAS 2.0 package processes the environment to issue lane change or collision risk alerts. The 24h parking mode requires the installation of the Hardwire Kit (sold separately) to the fuse box. Installation is via the πLink system, which uses only two connection lines to manage the three cameras, simplifying the routing of cables through the vehicle trim.
| Technical specifications | |
| Design | |
| Type | Dual channel Dashcam (Front + Rear) |
| Display | 3.0" IPS |
| Power supply | Built-in super capacitor |
| Temperature range | -20 °C to 70 °C |
| Cameras | |
| Front resolution | 4K UHD (3840 × 2160 px) at 30fps |
| Rear resolution | 4K UHD (3840 × 2160 px) at 30 fps |
| Image sensor | Sony STARVIS 2 IMX678 (1/1.8") |
| Aperture | F1.75 (front) - F1.7 (rear) |
| Angle of view (FOV) | 140° (front) - 125° (rear) |
| Image processing | NightVIS 2.0 - Triple Exposure HDR |
| Optical filter | CPL included |
| Storage | |
| Internal memory | 128 GB eMMC (D²save 2.0) |
| External memory | MicroSD up to 512 GB (UHS-I U3 V30 recommended) |
| Encoding | H.265 (HEVC) |
| Connectivity and positioning | |
| Wi-Fi | Dual Band (2.4 GHz / 5 GHz) |
| Bluetooth | Yes |
| GPS | Integrated Multiconstellation |
| 4G module | Included |
| Smart Features | |
| ADAS Assist | ADAS 2.0 (collision warning, lane departure, front vehicle start) |
| Parking mode | Supported (Hardwire Kit required) |
| Installation | |
| Interface | πLink (2 wires for 3 channels) |
| Rear cable length | 6 metres |
| Contents of the box | |
| Including |
1 × Front camera DDPAI Z90 Master |
| Brand | DDPAI |
|---|---|
| Country | China |
| Address of origin | 28F, Building 8A, International Innovation Valley, Nanshan District, Shenzhen, Guangdong Province, China |
| EU responsible person | DDPAI Technology Co., Ltd |
| Address | Calle Pedro Duque,1 Módulo 6B 28814 Daganzo de Arriba - Madrid |
| [email protected] | |
| Phone | +34 912844705 |
